Nanotechnology-mediated delivery of resveratrol as promising strategy to improve therapeutic efficacy in triple negative breast cancer (TNBC): progress and promises.

INTRODUCTION: Triple-negative breast cancer (TNBC) presents unique challenges in diagnosis and treatment. Resveratrol exhibits potential as a therapeutic intervention against TNBC by regulating various pathways such as the PI3K/AKT, RAS/RAF/ERK, PKCδ, and AMPK, leading to apoptosis through ROS-mediated CHOP activationand the expression of DR4 and DR5. However, the clinical efficacy of resveratrol is limited due to its poor biopharmaceutical characteristics and low bioavailability at the tumor site. Nanotechnology offers a promising approach to improving the biopharmaceutical characteristics of resveratrol to achieve clinical efficacy in different cancers. The small dimension (<200 nm) of nanotechnology-mediated drug delivery system is helpful to improve the bioavailability, internalization into the TNBC cell, ligand-specific targeted delivery of loaded resveratrol to tumor site including reversal of MDR (multi-drug resistance) condition. AREAS COVERED: This manuscript provides a comprehensive discussion on the structure-activity relationship (SAR), underlying anticancer mechanism, evidence of anticancer activity in in-vitro/in-vivo investigations, and the significance of nanotechnology-mediated delivery of resveratrol in TNBC. EXPERT OPINION: Advanced nano-formulations of resveratrol such as oxidized mesoporous carbon nanoparticles, macrophage-derived vesicular system, functionalized gold nanoparticles, etc. have increased the accumulation of loaded therapeutics at the tumor-site, and avoid off-target drug release. In conclusion, nano-resveratrol as a strategy may provide improved tumor-specific image-guided treatment options for TNBC utilizing theranostic approach.

3D printed capsule shells for personalized dosing of cyclosporine-loaded SNEDDS.

Cyclosporine (CsA) is a potent immunosuppressant agent that has been used since 1980 for the treatment of various autoimmune diseases and is extensively used to enhance the survival rate of patients and grafts following organ transplant surgeries. CsA is a poorly soluble drug with a narrow therapeutic window and inter-subject variability, which can lead to graft rejection, nephrotoxicity and other severe adverse effects. This study explores a novel method that combines solubility enhancement of CsA using SNEDDS formulation and personalized dosage delivery using 3D printing technology. The oil phase was chosen as a combination of caproyl 90 and octanoic acid while the Smix phase was chosen as a combination of cremophore El and PEG 400. The optimized liquid SNEDDS was solidified using PEG 6000. An FDM printer was used to print a capsular shell with an oval base that ascends to form a dome with an opening at the top. This opening is used to fill the molten CsA-loaded SNEDDS formulation using a pipette or syringe. The CsA-loaded SNEDDS formulation was characterized by FTIR, DSC and SEM/EDX. The in-vitro release of CsA showed complete release within sixty minutes and followed Korsmeyer-Peppas release kinetics. The drug release was not affected by either the shell opening size or the amount of the loaded formulation. This novel method is simple and straightforward for personalized dosage delivery of drug-loaded SNEDDS formulations.

Development of a Curcumin-Loaded Lecithin/Chitosan Nanoparticle Utilizing a Box-Behnken Design of Experiment: Formulation Design and Influence of Process Parameters.

Curcumin (CUR) has impressive pharmacologic properties, including cardioprotective, neuroprotective, antimicrobial, and anticancer activity. However, the pharmaceutical application of CUR is limited due to its poor aqueous solubility and low bioavailability. The development of novel formulations has attracted considerable attention to the idea of applying nanobiotechnology to improve the therapeutic efficacy of these challenging compounds. In this study, CUR-loaded lecithin−chitosan nanoparticles (CUR/LCSNPs) were developed and optimized by the concentration of chitosan, lecithin, and stirring speed by a 3-factorial Box-Behnken statistical design, resulting in an optimal concentration of chitosan (A) and lecithin (B) with a 1200 rpm stirring speed (C), with applied constraints of minimal average particle size (Y1), optimal zeta potential (Y2), and maximum entrapment efficiency (%EE) (Y3). The mean particle size of the checkpoint formulation ranged from 136.44 ± 1.74 nm to 267.94 ± 3.72, with a zeta potential of 18.5 ± 1.39 mV to 36.8 ± 3.24 mV and %EE of 69.84 ± 1.51% to 78.50 ± 2.11%. The mean particle size, zeta potential, %EE, and % cumulative drug release from the optimized formulation were 138.43 ± 2.09 nm, +18.98 ± 0.72 mV, 77.39 ± 1.70%, and 86.18 ± 1.5%, respectively. In vitro drug release followed the Korsmeyer−Peppas model with Fickian diffusion (n < 0.45). The optimized technique has proven successful, resulting in a nanoformulation that can be used for the high loading and controlled release of lipophilic drugs.

Investigation of Factors Influencing Formation of Nanoemulsion by Spontaneous Emulsification: Impact on Droplet Size, Polydispersity Index, and Stability.

Interest in nanoemulsion technology has increased steadily in recent years for its widespread applications in the delivery of pharmaceuticals, nutraceuticals, and cosmeceuticals. Rational selection of the composition and the preparation method is crucial for developing a stable nanoemulsion system with desired physicochemical characteristics. In the present study, we investigate the influence of intricate factors including composition and preparation conditions that affect characteristic parameters and the stability of the nanoemulsion formation prepared by the spontaneous emulsification method. Octanoic acid, capryol 90, and ethyl oleate were selected to represent oil phases of different carbon-chain lengths. We explored the impact of the addition mode of the oil-Smix phase and aqueous phase, vortexing time, Km (surfactant/cosurfactant) ratio, and the replacement of water by buffers of different pH as an aqueous system. The phase behavior study showed that the Smix phase had a significant impact on the nanoemulsifying ability of the nanoemulsions composed of oil phases of varying carbon-chain lengths. The mode of mixing of the oil-Smix phase to the aqueous phase markedly influenced the mean droplet size and size distribution of the nanoemulsions composed of oil phases as capryol 90. Vortexing time also impacted the mean droplet size and the stability of the generated nanoemulsion system depending on the varying carbon-chain length of the oil phase. The replacement of the water phase by aqueous buffers of pH 1.2, 5.5, 6.8, and 7.4 has altered the mean droplet size and size distribution of the nanoemulsion system. Further, the Km ratio also had a significant influence on the formation of the nanoemulsion system. The findings of this investigation are useful in understanding how the formulation composition and process parameters of the spontaneous emulsification technique are responsible for affecting the physicochemical characteristics and stability of the nanoemulsion system composed of oil of varying carbon-chain (C8-C18) length.

Nanoscale Topical Pharmacotherapy in Management of Psoriasis: Contemporary Research and Scope.

Psoriasis is a typical dermal condition that has been anticipated since prehistoric times when it was mistakenly implicit in being a variant of leprosy. It is an atypical organ-specific autoimmune disorder, which is triggered by the activation of T-cells and/or B-cells. Until now, the pathophysiology of this disease is not completely explicated and still, many research investigations are ongoing. Different approaches have been investigated to treat this dreadful skin disease using various anti-psoriatic drugs of different modes of action through smart drug-delivery systems. Nevertheless, there is no ideal therapy for a complete cure of psoriasis owing to the dearth of an ideal drug-delivery system for anti-psoriatic drugs. The conventional pharmacotherapy approaches for the treatment of psoriasis demand various classes of anti-psoriatic drugs with optimum benefit/risk ratio and insignificant untoward effects. The advancement in nanoscale drug delivery had a great impact on the establishment of a nanomedicine-based therapy for better management of psoriasis in recent times. Nanodrug carriers are exploited to design and develop nanomedicine-based therapy for psoriasis. It has a promising future in the improvement of the therapeutic efficacy of conventional anti-psoriatic drugs. The present manuscript aims to discuss the pathophysiology, conventional pharmacotherapy, and contemporary research in the area of nanoscale topical drug delivery systems for better management of psoriasis including the significance of targeted pharmacotherapy in psoriasis.

Preparation and Characterization of Curcumin Nanoemulgel Utilizing Ultrasonication Technique for Wound Healing: In Vitro, Ex Vivo, and In Vivo Evaluation.

Hydrogels being a drug delivery system has great significance particularly for topical application in cutaneous open wound. Its specific physicochemical properties such as non-adhesiveness, moisture retention, exudate absorption, and gas permeability make them ideal as a drug delivery vehicle for wound healing application. Further, curcumin (a natural bioactive) was selected as a therapeutic agent to incorporate into the hydrogel system to design and develop nanogel pharmaceutical products for wound healing. Although, curcumin possesses remarkable anti-inflammatory, antioxidant, and anti-infective activity along with hastening the healing process by acting over the different stages of the wound healing process, but its poor biopharmaceutical (low aqueous solubility and skin penetrability) attributes hamper their therapeutic efficacy for skin applications. The current investigation aimed to develop the curcumin-loaded nanogel system and evaluated to check the improvement in the therapeutic efficacy of curcumin through a nanomedicine-based approach for wound healing activity in Wistar rats. The curcumin was enclosed inside the nanoemulsion system prepared through a high-energy ultrasonic emulsification technique at a minimum concentration of surfactant required to nanoemulsify the curcumin-loaded oil system (Labrafac PG) having droplet size 56.25 ± 0.69 nm with polydispersity index 0.05 ± 0.01 and negatively surface charge with zeta potential -20.26 ± 0.65 mV. It was observed that the impact of Smix (surfactant/co-surfactant mixture) ratio on droplet size of generated nanoemulsion is more pronounced at lower Smix concentration (25%) compared to the higher Smix concentration (30%). The optimized curcumin-loaded nanoemulsion was incorporated into a 0.5% Carbopol® 940 hydrogel system for topical application. The developed curcumin nanoemulgel exhibited thixotropic rheological behavior and a significant (p < 0.05) increase in skin penetrability characteristics compared to curcumin dispersed in conventional hydrogel system. The in vivo wound healing efficacy study and histological examination of healed tissue specimen further signify the role of the nanomedicine-based approach to improve the biopharmaceutical attributes of curcumin.

Thymoquinone Loaded Topical Nanoemulgel for Wound Healing: Formulation Design and In-Vivo Evaluation.

Thymoquinone is a natural bioactive with significant therapeutic activity against multiple ailments including wound healing. The poor aqueous solubility and low skin permeability limit its therapeutic efficacy. The present investigation aimed to improve the biopharmaceutical attributes of thymoquinone to enhance its topical efficacy in wound healing. A nanoemulsion-based hydrogel system was designed and characterized as a nanotechnology-mediated drug delivery approach to improve the therapeutic efficacy of thymoquinone, utilizing a high-energy emulsification technique. The black seed oil, as a natural home of thymoquinone, was utilized to improve the drug loading capacity of the developed nanoemulsion system and reduced the oil droplet size to <100 nm through ultrasonication. The influence of formulation composition, and the ultrasonication process conditions, were investigated on the mean globule size and polydispersity index of the generated nanoemulsion. Irrespective of surfactant/co-surfactant ratio and % concentration of surfactant/co-surfactant mixture, the ultrasonication time had a significant (p < 0.05) influence on the mean droplet size and polydispersity index of the generated nanoemulsion. The developed nanoemulgel system of thymoquinone demonstrated the pseudoplastic behavior with thixotropic properties, and this behavior is desirable for topical application. The nanoemulgel system of thymoquinone exhibited significant enhancement (p < 0.05) in skin penetrability and deposition characteristics after topical administration compared to the conventional hydrogel system. The developed nanoemulgel system of thymoquinone exhibited quicker and early healing in wounded Wistar rats compared to the conventional hydrogel of thymoquinone, while showing comparable healing efficacy with respect to marketed silver sulfadiazine (1%) cream. Furthermore, histopathology analysis of animals treated with a developed formulation system demonstrated the formation of the thick epidermal layer, papillary dermis along with the presence of extensive and organized collagen fibers in newly healed tissues. The outcome of this investigation signifies that topical delivery of thymoquinone through nanoemulgel system is a promising candidate which accelerates the process of wound healing in preclinical study.

3D Printing of Dapagliflozin Containing Self-Nanoemulsifying Tablets: Formulation Design and In Vitro Characterization.

The 3D printing techniques have been explored extensively in recent years for pharmaceutical manufacturing and drug delivery applications. The current investigation aims to explore 3D printing for the design and development of a nanomedicine-based oral solid dosage form of a poorly water-soluble drug. A self-nanoemulsifying tablet formulation of dapagliflozin propanediol monohydrate was developed utilizing the semisolid pressure-assisted microsyringe (PAM) extrusion-based 3D printing technique. The developed formulation system consists of two major components (liquid and solid phase), which include oils (caproyl 90, octanoic acid) and co-surfactant (PEG 400) as liquid phase while surfactant (poloxamer 188) and solid matrix (PEG 6000) as solid-phase excipients that ultimately self-nanoemulsify as a drug encapsulated nanoemulsion system on contact with aqueous phase/gastrointestinal fluid. The droplet size distribution of the generated nanoemulsion from a self-nanoemulsifying 3D printed tablet was observed to be 104.7 ± 3.36 nm with polydispersity index 0.063 ± 0.024. The FT-IR analysis of the printed tablet revealed that no drug-excipients interactions were observed. The DSC and X-RD analysis of the printed tablet revealed that the loaded drug is molecularly dispersed in the crystal lattice of the tablet solid matrix and remains solubilized in the liquid phase of the printed tablet. SEM image of the drug-loaded self-nanoemulsifying tablets revealed that dapagliflozin propanediol monohydrate was completely encapsulated in the solid matrix of the printed tablet, which was further confirmed by SEM-EDS analysis. The in vitro dissolution profile of dapagliflozin-loaded self-nanoemulsifying tablet revealed an immediate-release drug profile for all three sizes (8 mm, 10 mm, and 12 mm) tablets, exhibiting >75.0% drug release within 20 min. Thus, this study has emphasized the capability of the PAM-based 3D printing technique to print a self-nanoemulsifying tablet dosage form with an immediate-release drug profile for poorly water-soluble drug.

Assessment of Pharmacist's Knowledge and Perception toward 3D Printing Technology as a Dispensing Method for Personalized Medicine and the Readiness for Implementation.

The main user of three dimensional (3D) printing for drug dispensing will be the hospital pharmacist. Yet despite the tremendous amount of research and industrial initiatives, there is no evaluation of the pharmacist's knowledge and opinion of this technology. The present study aimed to assess knowledge and attitude among pharmacists about 3D printing technology as an innovative dispensing method for personalized medicine and the barriers to implementation in Saudi Arabia. We found that 53% of participants were aware of 3D printing technology in general, but only 14-16% of pharmacists were aware of the specific application of 3D printing in drug dispensing. Participants showed a positive perception regarding the concept of personalized medicine and that 3D printing could provide a promising solution to formulate and dispense personalized medicine in the pharmacy. It was also found that 67% of pharmacists were encouraged to adopt this new technology for drug dispensing, reflecting their willingness to learn new innovations. However, the technology cost, regulation, and the shortage of practicing pharmacists were also reported as the top barriers for implementation. Facilitating the implementation of this technology in the pharmacy practice will require a strategic plan in which pharmacists collaborate with regulatory bodies and 3D printing engineers to overcome challenges and barriers to implement such promising technology.

Formulation design and evaluation of aceclofenac nanogel for topical application.

Aim: The current study aimed to explore the feasibility of the nanoemulgel for the topical delivery of aceclofenac. Materials & methods: Solubility of drugs in the formulation systems was determined and aceclofenac nanoemulsion (NE) was prepared by high-pressure homogenization technique. Carbopol 940 was added as a gelling agent. Results & conclusion: The composition of optimized NE consist of labrafil along with triacetin as oil, tween 80 and cremophor EL in combination as a surfactant and transcutol HP along with PEG 400 and ethanol as cosurfactant. The droplet size of the NE was 141.1 ± 3.65 nm, with low polydispersity index and negative zeta potential. The aceclofenac-nanoemulgel was developed using carbopol 940 and exhibited excellent permeation in comparison to the marketed sample.

Co-Delivery of Imiquimod and Curcumin by Nanoemugel for Improved Topical Delivery and Reduced Psoriasis-Like Skin Lesions.

The current investigation aimed to improve the topical efficacy of imiquimod in combination with curcumin using the nanoemulsion-based delivery system through a combinatorial approach. Co-delivery of curcumin acts as an adjuvant therapeutic and to minimize the adverse skin reactions that are frequently associated with the topical therapy of imiquimod for the treatment of cutaneous infections and basal cell carcinomas. The low-energy emulsification method was used for the nano-encapsulation of imiquimod and curcumin in the nanodroplet oil phase, which was stabilized using Tween 20 in an aqueous dispersion system. The weak base property of imiquimod helped to increase its solubility in oleic acid compared with ethyl oleate, which indicates that fatty acids should be preferred as the oil phase for the design of imiquimod-loaded topical nanoemulsion compared with fatty acid esters. The phase diagram method was used to optimize the percentage composition of the nanoemulsion formulation. The mean droplet size of the optimized nanoemulsion was 76.93 nm, with a polydispersity index (PdI) value of 0.121 and zeta potential value of -20.5 mV. The optimized imiquimod-loaded nanoemulsion was uniformly dispersed in carbopol 934 hydrogel to develop into a nanoemulgel delivery system. The imiquimod nanoemulgel exhibited significant improvement (p<0.05) in skin permeability and deposition profile after topical application. The in vivo effectiveness of the combination of imiquimod and curcumin nanoemulgel was compared to the imiquimod nanoemulgel and imiquimod gel formulation through topical application for ten days in BALB/c mice. The combination of curcumin with imiquimod in the nanoemulgel system prevented the appearance of psoriasis-like symptoms compared with the imiquimod nanoemulgel and imiquimod gel formulation entirely. Further, the imiquimod nanoemulgel as a mono-preparation slowed and reduced the psoriasis-like skin reaction when compared with the conventional imiquimod gel, and that was contributed to by the control release property of the nano-encapsulation approach.

Development of a 3D Printed Coating Shell to Control the Drug Release of Encapsulated Immediate-Release Tablets.

The use of 3D printing techniques to control drug release has flourished in the past decade, although there is no generic solution that can be applied to the full range of drugs or solid dosage forms. The present study provides a new concept, using the 3D printing technique to print a coating system in the form of shells with various designs to control/modify drug release in immediate-release tablets. A coating system of cellulose acetate in the form of an encapsulating shell was printed through extrusion-based 3D printing technology, where an immediate-release propranolol HCl tablet was placed inside to achieve a sustained drug release profile. The current work investigated the influence of shell composition by using different excipients and also by exploring the impact of shell size on the drug release from the encapsulated tablet. Three-dimensional printed shells with different ratios of rate-controlling polymer (cellulose acetate) and pore-forming agent (D-mannitol) showed the ability to control the amount and the rate of propranolol HCl release from the encapsulated tablet model. The shell-print approach also showed that space/gap available for drug dissolution between the shell wall and the enclosed tablet significantly influenced the release of propranolol HCl. The modified release profile of propranolol HCl achieved through enclosing the tablet in a 3D printed controlled-release shell followed Korsmeyer-Peppas kinetics with non-Fickian diffusion. This approach could be utilized to tailor the release profile of a Biopharmaceutics Classification System (BCS) class I drug tablet (characterized by high solubility and high permeability) to improve patient compliance and promote personalized medicine.

Nanoemulgel for Improved Topical Delivery of Retinyl Palmitate: Formulation Design and Stability Evaluation.

Retinyl palmitate is a vitamin A ester belonging to the family of endogenous natural retinoid and used to treat various skin disorders like acne, skin aging, wrinkles, and dark spots, as well as to protect against psoriasis. Despite the known therapeutic benefits of retinyl palmitate, the conventional topical delivery of retinyl palmitate commonly associated with adverse reactions such as skin irritation, redness, excessive peeling, and dryness. Therefore, the current study aims to encapsulate the retinyl palmitate in nanoemulsion then incorporate it into a hydrogel system to improve the topical delivery and stability. Low-energy emulsification method was used for the nano-encapsulation of retinyl palmitate. The phase behavior study was used for the investigation and the optimization of the formulation. The droplet size of the optimized nanoemulsion was in nano dimension (16.71 nm) with low polydispersity index (PdI) (0.015), negative zeta potential (-20.6 mV). It demonstrated the influence of vortexing on droplet size and PdI during nanoemulsion preparation. The retinyl palmitate loaded nanoemulgel delivery system exhibited significant improvement (p < 0.05) in skin permeability after topical application. Employment of the nano-encapsulation approach afterward dispersion into hydrogel system for the development of a topical delivery system of retinyl palmitate resulted in improvement in its UV and storage stability as well.

Prevalence of Hypothyroidism Among Carpal Tunnel Syndrome Patients at a Hospital in Saudi Arabia.

Introduction Patients with carpal tunnel syndrome have a high prevalence of hypothyroidism, therefore, it is recommended to assess thyroid function routinely in patients with carpal tunnel syndrome. This study aims to determine the prevalence of hypothyroidism among carpal tunnel patients and to relate carpal tunnel in hypothyroidism to other socio-demographic factors. Methods This was a retrospective study carried out in King Fahad Medical City (KFMC) in Riyadh, Saudi Arabia. A total of 422 samples were collected conveniently from the files of patients who underwent carpal tunnel release surgery. The Statistical Package for the Social Sciences (SPSS) version 23 was used for data processing. The chi-square test was used to test the association between the categorical variables. A p-value of less than .05 was considered to be significant. Results Most of the respondents were females and most of them within the age group of 46 to 60 years. Thirteen point eight percent (13.8%) of the respondents are suffering from hypothyroidism and 5% from the sub-clinical form of the disease. More than two-thirds of those with hypothyroidism were asymptomatic. The duration of the disease was one to five years, and bilateral nerve concerns were mostly present in patients with carpal tunnel syndrome. The presence of thyroid abnormality doesn't affect the duration of carpal tunnel syndrome but body mass index (BMI) is significantly associated with hypothyroidism (p-value = .001). Conclusion Clinical symptoms of hypothyroidism are mostly absent in patients with carpal tunnel syndrome. Most patients with carpal tunnel syndrome have the disease for one to five years and this is not significantly associated with abnormal thyroid. Most patients have bilateral wrist involvement with no apparent symptoms and signs.

Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications.

Three-dimensional printing (3DP) has a significant impact on organ transplant, cosmetic surgery, surgical planning, prosthetics and other medical fields. Recently, 3 DP attracted the attention as a promising method for the production of small-scale drug production. The knowledge expansion about the population differences in metabolism and genetics grows the need for personalised medicine substantially. In personalised medicine, the patient receives a tailored dose and the release profile is based on his pharmacokinetics data. 3 DP is expected to be one of the leading solutions for the personalisation of the drug dispensing. This technology can fabricate a drug-device with complicated geometries and fillings to obtain the needed drug release profile. The extrusionbased 3 DP is the most explored method for investigating the feasibility of the technology to produce a novel dosage form with properties that are difficult to achieve using the conventional industrial methods. Extrusionbased 3 DP is divided into two techniques, the semi-solid extrusion (SSE) and the fused deposition modeling (FDM). This review aims to explain the extrusion principles behind the two techniques and discuss their capabilities to fabricate novel dosage forms. The advantages and limitations observed through the application of SSE and FDM for fabrication of drug dosage forms were discussed in this review. Further exploration and development are required to implement this technology in the healthcare frontline for more effective and personalised treatment.

High throughput screening for biomaterials discovery.

Using microarray technologies thousands of biomedical materials can be screened in a rapid, parallel and cost effective fashion to identify the optimum candidate that fulfils a specific biomedical application. High throughput surface characterization (HTSC) of printed microarrays has played a key role in the discovery and development of biomedical materials. This review focuses on the production and HTSC of microarrays, their application in specific biomedical fields and a future perspective on the development of this technology.